Sun Microsystems Virtual Tape Library manual Day schedule

Trap	Severity	Message
1020	Informational	Replication for virtual tape %1 started.
1021	Informational	Replication for virtual tape %1 finished.
1022	Warning	Replication has failed for virtual tape %1 -- %2.
1023	Error	Failed to connect to physical device %1. Switching alias to %2.
1024	Informational	Device %1 has attached to the VTL Server.
1025	Informational	Device %1 has detached from the VTL Server.
1026	Informational	Replication has been started for virtual tape %1; it was triggered by the
		watermark.
1027	Informational	Replication has been started for virtual tape %1; it was triggered by the
		interval schedule.
1028	Informational	Replication has been started for virtual tape %1; it was triggered by the time
		of day schedule.
1029	Informational	Replication has been started for virtual tape %1; it was manually triggered by
		the administrator.
1030	Error	Failed to start replication -- replication is already in progress for virtual
		tape %1.
1031	Error	Failed to start replication -- replication control area not present on virtual
		tape %1.
1032	Error	Failed to start replication -- replication control area has failed for virtual
		tape %1.
1034	Error	Replication failed for virtual device %1 -- the network transport returned
		error %2.
1035	Error	Replication failed for virtual device %1 -- the local disk failed with error
		%2.
1038	Error	Replication failed for virtual device %1 -- the local server could not
		allocate memory.
1039	Error	Replication failed for virtual device %1 -- the replica failed with error %2.
1040	Error	Replication failed for virtual device %1 -- failed to set the replication
		time.
1041	Informational	Mirror synchronization started for virtual device %1.
1042	Informational	Mirror synchronization finished for virtual device %1.
1043	Error	A SCSI command terminated with a non-recoverable error condition that was most
		likely caused by a flaw in the medium or an error in the recorded data.
		Please check the system log for additional information.
1044	Error	"A SCSI command terminated with a non-recoverable hardware failure (for
		example, controller failure, device failure, parity error, etc.). Please
		check the system log for additional information."
1045	Informational	Rescan replica has completed for virtual device %1
1046	Error	Rescan replica has failed for virtual device %1 -- the local device failed
		with error %2.

244 VTL User Guide • May 2008 G • 96267