Sun Microsystems Virtual Tape Library manual G Configuring email alerts

■ipstorckcfg check ipstor.conf (VTL configuration check) notifies the administrator if the VTL software’s XML configuration file, ipstor.conf, changes. If changes are found or if no previous version exists, the script creates a copy of the current file under the name ipstorconf.diff.nnn, where nnn is the script-generated version number of the file.

■diskusagechk.sh / 95 notifies the administrator if root file system utilization exceeds a pre-defined percentage. If the current percentage is over the specified percentage (by default, 95%). Copies of the script can be modified to monitor any chosen mount point.

■defaultipchk.sh eth0 10.1.1.1 notifies the administrator if the IP address for the specified NIC does not match a specified value. Copies of the script can be modified to monitor additional NICs.

■ipstorstatus.sh runs the vtl status command and notifies the administrator if one or more VTL software modules have stopped.

6.When the Set Email Alerts System Log Check Properties dialog appears, add the regular expressions for any patterns that you want the notification process to parse for when examining logs. To add an expression, press Add (H below) to bring up a dialog box, then enter the pattern in the space

provided. Press Next (J) when ready.

H

J

96267 • G Chapter 7 Configuring email alerts 161