Sun Microsystems Virtual Tape Library manual When the Prepare Device panel appears, press Finish

Managing virtual libraries

5.When the Select Physical Devices panel appears, use the check boxes and/or the selection buttons (F below) to select the libraries or devices that you want to assign to the VTL system. Press Next (G).

If you are configuring an IBM iSeries/AS400 solution, assign IBM Magstar 3590E11, 3592, or Ultrium LTO1, LTO2, or LTO3 physical drives to the virtual tape library for use in import and export operations.

A

B

6. When the Prepare Device panel appears, press Finish.

Next task: “Assigning direct‐attached physical tape libraries/devices” on page 37.

36 VTL User Guide • May 2008 G • 96267