Sun Microsystems Virtual Tape Library manual Physical devices, Stop replication

Physical devices

Stop replication

iscon stopreplication -s <server-name> [-u <username> -p <password>] -v <vdevid> [-X <rpc-timeout>]

iscon stopreplication --server-name=<server-name>

[--server-username=<username> --server-password=<password>] -vdevid=<vdevid> [--rpc-timeout=<rpc-timeout>]

This command allows you to stop the replication that is in progress for a virtual device.

‐v (‐‐source‐vdevid) is the ID of the source virtual tape on the primary server to stop.

‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds for the RPC timeout. The system will retry the command for the amount of time specified if the server does not respond. The default RPC timeout is 30 seconds.

Physical devices

Inventory physical tape library

iscon plibinventory -s <server-name> [-u <username> -p <password>] [-l <physical-tape-library-vid>] [-X <rpc-timeout>]

iscon plibinventory --server-name=<server-name>

[--server-username=<username> --server-password=<password>]

[--plib-vid=<tape-library-vid>] [--rpc-timeout=<rpc-timeout>] Description:

This command performs an inventory of the physical tapes in a physical tape library.

‐l (‐‐plib‐vid) is an option to specify the physical tape library to perform the inventory.

Inventory operation will be performed for all the physical tape libraries if ‐l (‐‐plib‐ vid) is not specified.

‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds for the RPC timeout. The system will retry the command for the amount of time specified if the server does not respond. The default RPC timeout is 30 seconds.

208 VTL User Guide • May 2008 G • 96267