Sun Microsystems Virtual Tape Library manual System configuration, Add a license keycode

System configuration

‐I (‐‐scsiaddress) is the option to specify which physical devices should be used to create the virtual device. It can be a list of ACSLs separated with commas or a file enclosed in <> containing an ACSL on each line.

ACSL=#:#:#:# (adapter:channel:id:lun)

‐n (‐‐vdevname) is an option to specify the virtual tape name or prefix when creating more than one tape. The maximum length of the virtual device name is 64. Leading and trailing spaces will be removed. Enclose the name in double quotes to ensure it is properly parsed and interpreted. The following characters are invalid for the name: <>ʺ&$/\ʹ

‐g (‐‐size‐gb) is an option to specify the size in GB. The size of the virtual tape will be the size configured in the properties of the virtual tape library or virtual tape drive if it is not specified. This option cannot be specified if the capacity‐on‐demand option is not enabled at library level.

‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 seconds for the RPC timeout. The system will retry the command for the amount of time specified if the server does not respond. The default RPC timeout is 30 seconds.

System configuration

Add a license keycode

iscon addlicense -s <server-name> [-u <username> -p <password>] -k <license- keycode>

[-X <rpc-timeout>]

iscon addlicense --server-name=<server-name>

[--server-username=<username> --server-password=<password>] -- license=<license-keycode> [--rpc-timeout=<rpc-timeout>]

Description:

This command adds a license keycode.

‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds for the RPC timeout. The system will retry the command for the amount of time specified if the server does not respond. The default RPC timeout is 30 seconds.

194 VTL User Guide • May 2008 G • 96267