CONFIGURING THE IP250D
FIGURE 3.1 – THE CONFIGURATION HOME PAGE
3.2 LAN CONFIGURATION
The LAN Configuration page allows configuration of the device’s local network settings. Sub-pages are available to configure the LAN Interface settings.
3.2.1 LAN Interface Settings
This sub-page allows the user to configure the device’s LAN interface settings. Select whether you wish for the device to be configured via a DHCP server on the network, or statically configured. If you wish to statically assign the network settings, enter the IP address, subnet mask, default gateway IP address and DNS server IP address. It is also recommended that the network domain name be provided as well, to ensure correct DNS operation. Press SAVE LAN SETTINGS to save the network settings.
3.2.2 VLAN Settings
To enable VLAN for network traffic, set the VLAN TAG AND PRIORITY TAG. Press SAVE VLAN Settings to save the VLAN settings. Reset the unit to have the new settings take effect.
3.3 MGCP CONFIGURATION
If the device is running the MGCP protocol, select MGCP from the menu. This will provide sub-options to configure the MGCP server and device endpoint settings, how the device is to handle any out-of-band(OOB) DTMF signaling, and VLAN prioritization for MGCP packets.
Teledex IP250D User’s Guide SIP/MGCP | 6 |
| |
