Teledex IP250DVoIP manual Download Configuration, Reset Configuration, Snmp Settings

CONFIGURING THE IP250D

3.6.3 SNMP Settings

This sub-page is used for configuring the device’s SNMP server. Configure the SNMP Trap Host IP address and community, the SNMP read and write community parameters, and the SNMP System Description and System Object ID parameters. Press Save SNMP Settings to apply the new values. These settings will only take effect when the device is rebooted.

3.7 DOWNLOAD CONFIGURATION

This page provides two options for downloading a new firmware application image to the device. If you wish to download the new firmware image using TFTP, enter the filename of the ROM image and enter the IP address of the TFTP server on which this file resides. Press START TFTP DOWNLOAD to initiate the TFTP download process.

If the ROM image is stored on the same local machine you are using to access the device’s web pages, you can choose to download the ROM file to the device using an HTTP post. Enter the filename of the ROM image or press BROWSE to help locate the file. Press START HTTP DOWNLOAD to initiate the HTTP download process. If the main application is executing at the time, the device will automatically reboot itself into the downloader mode and begin the download process. If the downloader application is executing at the time, the download process will begin. The download status will be displayed when the image download process is complete. Please refer to Section 6, The Downloader Application for more details on the download process.

3.8 RESET CONFIGURATION

This page provides options for resetting the device. Select whether you wish to reset the device and start executing the main (default) application, or whether you wish to reset the device and start executing the internal downloader application. Press RESET to reset the device.

Teledex IP250D User’s Guide SIP/MGCP 10