Enterasys Networks B3G124-24P, B3G124-48P - page 69

Using the Reset Switch
SecureStack B3 Installation Guide 4-9
Toresettheswitchpassword,refertoFigure 4‐3andproceedasfollows:
1. Press‐and‐holdtheResetswitchwhiletheswitchdeviceisoperational.Thischangeof
theloginpasswordtothedefaultpasswordwillbeindicatedthroughCLIonly.
2. Logontodevicemanagement.YoucannowlogontotheswitchthroughtheConsole
portandassignanewpasswordusingthecommandlineinterface(CLI).
3. ToaccessswitchmanagementfromyourlocalPC,terminal,ormodemconnection,
refertotheSecureStackB3ConfigurationGuideforinstructionsonhowtologinand
enteranewpassword.Theguideisavailableat:
http://www.enterasys.com/support/manuals
Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribed
in“GettingHelp”onpage xviii.
Note: Notify the system manager before changing the password.