Enterasys Networks B3G124-24P manual B3G124-48P Lanview LEDs

Using LANVIEW

Figure 4-2 B3G124-48P LANVIEW LEDs

B3G124-48P

1	CPU LED	5	Manager LED
2	STACK DOWN LED	6	Link/Activity LEDs for 10/100/1000 Mbps RJ45
3	STACK UP LED		ports 1 through 48
4	RPS LED for redundant power-source	7	Link/Activity LEDs for 1-Gbps Mini-GBIC ports
	status		45 through 481

1.These Mini-GBIC ports will only establish a link when the RJ45 port equivalent is not linked on a B3G124-48P.(For example, when Mini-GBIC port 45 is linked, RJ45 port 45 is deactivated. When the Mini-GBICis not linked, the RJ45 port 45 is reactivated and can establish a link as long as the Mini-GBIC port 45 is not linked first.)

Table 4‐1 describes the LED indications and provides recommended actions as appropriate.

Note: The terms flashing, blinking, and solid used in Table 4-1indicate the following:

Blinking: LED is flashing at a steady rate (approximately 50% on, 50% off).

Solid: LED is on steady and not pulsing.

SecureStack B3 Installation Guide 4-3