ZyXEL Communications 2602RL-D3A From the SIP Server Address field again here, Domain, User Name

Prestige 2602RL-D3A Support Notes

	Enter the SIP register server’s address in this field.
	If you were not given a register server address, then enter the address
	from the SIP Server Address field again here.
REGISTER	Enter the SIP register server’s listening port for SIP in this field.
Server Port
	If you were not given a register server port, then enter the port from the
	SIP Server Port field again here.
SIP Service	A SIP service domain is the domain name that comes after the @ symbol in a
Domain	full SIP URI.
	Enter the SIP service domain name in this field.You can use up to 127 ASCII
	Extended set characters.
User Name	This is the user name for registering this SIP account with the SIP register
	server. Type the user name exactly as it was given to you. Use ASCII
	characters.
Password	Type the password associated with the user name above. Use ASCII
	Extended set characters.
Send Caller	Select this check box to show identification information when you make VoIP
ID	calls. Clear this check box to not show identification information when you
	make VoIP calls.
Advanced	Click Advanced Setup to open a screen where you can configure the
Setup	Prestige’s advanced VoIP settings like SIP server settings, the RTP port
	range and the coding type.
Apply	Click Apply to save your changes back to the Prestige.
Reset	Click Reset to begin configuring this screen afresh.

Phone port settings

Prestige allows you to configure the volume and echo cancellation setting for each individual phone port.

97

All contents copyright (c) 2007 ZyXEL Communications Corporation.