Prestige 2602RL-D3A Support Notes

Apply the first filter set 'NetBIOS_WAN' to the 'Output Protocol Filter' in the remote node setup.

Configure the second filter set 'NetBIOS_LAN' by selecting the Filter Set number 2.

Rule 1-Source port number 137, Destination port number 53 with protocol number 6 (TCP)

Menu 21.2.1 - TCP/IP Filter Rule

Filter #: 2,1

Filter Type= TCP/IP Filter Rule

Active= Yes

 

IP Protocol= 6

IP Source Route= No

Destination: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 53

Port # Comp= Equal

Source: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 137

Port # Comp= Equal

TCP Estab= No

 

More=

No

Log= None

Action Matched= Drop

Action Not Matched= Check Next Rule

Press

ENTER to Confirm or ESC to Cancel:

 

 

 

 

 

 

Rule 2-Source port number 137, Destination port number 53 with protocol number 17 (UDP)

Menu 21.2.2 - TCP/IP Filter Rule

Filter #: 2,2

Filter Type= TCP/IP Filter Rule

Active= Yes

60

All contents copyright (c) 2007 ZyXEL Communications Corporation.

Page 60
Image 60
ZyXEL Communications manual Prestige 2602RL-D3A Support Notes