ZyXEL Communications 2602RL-D3A manual Following table describes the fields in this screen

Prestige 2602RL-D3A Support Notes

Local IP:

Start= 0.0.0.0

End = N/A

Global IP:

Start= 0.0.0.0

End = N/A

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this screen.

Field Description Option/Example

Type

One-to-One

Press [SPACEBAR] to toggle through a total of 5 types. These Many-to-One

are the mapping types discussed above plus a server type. Some Many-to-Many Overload

examples follow to clarify these a little more.

Many-to-Many No

Overload

Server

Local

IP

Global

IP

Start

End

Start

End

This is the starting local IP address (ILA) 0.0.0.0

This is the ending local IP address (ILA). If the rule is for all

local IPs, then put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255 255.255.255.255. This field is N/A for One-to-Onetype.

This is the starting global IP address (IGA). If you have a 0.0.0.0 dynamic IP, enter 0.0.0.0 as the Global Start IP.

This is the ending global IP address (IGA). This field is N/A for 200.1.1.64 One-to-One, Many-to-Oneand Server types.

Note: For all Local and Global IPs, the End IP address must begin after the IP Start address, i.e., you cannot have an End IP address beginning before the Start IP address.

∙NAT Server Sets

26

All contents copyright (c) 2007 ZyXEL Communications Corporation.