ZyXEL Communications 2602RL-D3A manual Field Options Description, Full Feature, None, SUA Only

Prestige 2602RL-D3A Support Notes

You apply NAT via menus 4 and 11.3 as displayed next. The next figure how you apply NAT for Internet access in menu 4. Enter 4 from the Main Menu to go to Menu 4-Internet Access Setup.

Menu 4 - Internet Access Setup

ISP's Name= MyISP

Encapsulation= PPPoE

Multiplexing= LLC-based

VPI #= 0

VCI #= 33

ATM QoS Type= UBR

Peak Cell Rate (PCR)= 0

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

My Login= cso@zyxel

My Password= ********

Idle Timeout (sec)= 0

IP Address Assignment= Dynamic

IP Address= N/A

Network Address Translation= Full Feature

Address Mapping Set= 1

Press ENTER to Confirm or ESC to Cancel:

The following table describes the options for Network Address Translation.

Field	Options	Description
		When you select this option the SMT will use Address
	Full Feature	Mapping Set 1 (Menu 15.1-see later for further
		discussion).
Network Address Translation	None	NAT is disabled when you select this option.
		When you select this option the SMT will use Address
	SUA Only	Mapping Set 255 (Menu 15.1-see later for further
		discussion). This option use basically Many-to-One
		21

All contents copyright (c) 2007 ZyXEL Communications Corporation.