ZyXEL Communications 2602RL-D3A manual Using syslog

Prestige 2602RL-D3A Support Notes

Trap:

Community= public

Destination= 192.168.1.33

Press ENTER to Confirm or ESC to Cancel:

Key Settings:

Option	Descriptions
Get Community	Enter the correct Get Community. This Get Community must match the 'Get-' and
	'GetNext' community requested from the NMS. The default is 'public'.

Set Community

Enter the correct Set Community. This Set Community must match the 'Set-community requested from the NMS. The default is 'public'.

Trusted Host

Enter the IP address of the NMS. The Prestige will only respond to SNMP messages coming from this IP address. If 0.0.0.0 is entered, the Prestige will respond to all

NMS managers.

Trap

Community

Trap Destination

Enter the community name in each sent trap to the NMS. This Trap Community must match what the NMS is expecting. The default is 'public'.

Enter the IP address of the NMS that you wish to send the traps to. If 0.0.0.0 is

entered, the Prestige will not send trap any NMS manager.

Using syslog

4.Prestige Setup

Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting

UNIX Syslog:

Active= Yes

Syslog IP Address= 192.168.1.33

Log Facility= Local 1

70

All contents copyright (c) 2007 ZyXEL Communications Corporation.