ZyXEL Communications 2602RL-D3A manual Priority, Voice Vlan, Call Forwarding setup

Prestige 2602RL-D3A Support Notes

Each field's detail description of the page is listed below.

Label	Description
SIP TOS	Type a priority for voice transmissions. The Prestige applies Type of Service
Priority	priority tags with this priority to voice traffic that it transmits.
RTP TOS	Type a priority for voice transmissions. The Prestige applies Type of Service
Priority	priority tags with this priority to RTP traffic that it transmits.
Voice VLAN	Enable VLAN tagging if the Prestige needs to be a member of a VLAN group
ID	in order to communicate with the SIP server. Your LAN and gateway must
	also be set up to use VLAN tags. Some switches also give priority to voice
	traffic based on its VLAN tag.
	Type the VLAN ID (VID) from 1 to 4095 for the Prestige to add to voice
	Ethernet frames that it sends out to the network.
	Disable VLAN tagging if the Prestige does not need to be a member of a
	VLAN group to communicate with the SIP server.
Apply	Click Apply to save your changes back to the Prestige.

Call Forwarding setup

Call forwarding function allows users to determine handling of incoming calls. For example, a user may wish to decide that all incoming calls will ring his cell phone as well. The following screenshot shows how users can use this screen to configure the Prestige to block or redirect calls. You can configure a different call forwarding table for each SIP account or use the same call forwarding table for both.

107

All contents copyright (c) 2007 ZyXEL Communications Corporation.