Cisco Systems 10200 manual Command Entered Response Possible Conditions

Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-4	Understanding Trunk Group and Trunk Generic Command Responses (continued)
Command	Command
Entered	Response	Possible Conditions
any	Failure	• Found no failure
		• TG(s) cannot be found, trunk(s) cannot be found, no TG(s) found in
		trunking gateway, no trunk(s) found in TG
		• Fail while in termination table, fail while in TG table, fail while in
		trunk table, fail while looking to find trunk index, fail while getting
		TG administration state
		• Failed to allocate IPC message(s), failed to dispatch IPC message(s)
		• Operational state invalid, administration state invalid
		• Trunk(s) state change and pending
		• Found TG type invalid, found TG state invalid, found TG admin state
		not ready
		• Entity in desired state
		• Not allow trunk to reset
		• Change to out-of-service state required, change to request graceful
		mode error
		• Found entity unequipped in initial state
		• Operation not allowed because D Channel(s) is down
		• Found unknown failure reason(s)

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

5-8 OL-16000-07