
Appendix B FIM/XML
Installing the FIM/XML File Using the Offline FIM/XML Tool
Step 6 Run the following Java application:
java —jar fimxml.jar param1 param2 param3 param4
Where
•param1 = the name of the external FIM/XML file described in Step 3
•param2 = the name of the original FIM/XML file produced during the Cisco BTS 10200 installation. Copy this file from the following path: /opt/OptiCall/etc/fimxml/FSPTC235/FIMXMLRules.xml.
•param3 = the name of the configuration file described in Step 4
•param4 = the name of the configurable file to be generated (defaults to merged.xml). This parameter is optional.
If the script runs successfully, the tool returns the following message SUCCESS!! New FIM/XML generated at path <path>. The successfully generated configurable FIM/XML files are copied or FTP to the EMS.
If the script does not complete successfully, the system returns a
Note The tool produces log files for both successful and unsuccessful attempts.
Note You can troubleshoot the errors from the descriptions provided with the error messages.
Step 7 Run the following command from the EMS:
install fimxml file_name=<absolute_path>
This command does the following:
•Processes the configurable FIM/XML file on the EMS
•Adds, updates and/or deletes the external feature names from the new fimxml file.
•Copies the new file to the following path:
/opt/OptiCall/etc/fimxml/FSPTC235/FIMXMLRules.xml
Step 8 Restart the POTS Feature Server on both the CA primary and secondary nodes to load the configurable FIM/XML file.
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
|
|
| |
|
|