Cisco Systems 10200 manual Set

Chapter 7 Using the BTS SNMP Agent

Viewing and Managing BTS Components

Table 7-3	Viewing and Managing BTS Components (continued)
Task		Operation
Changing settings on		1. SET necessary fields (Mode column, TargetState column, etc).
BTS components		2.	SET on the ControlState column, using 1 (commit) to change the state.
		SET
		•	Primary EMS
		•	Primary BDMS
		•	Primary CA
		•	Primary POTS/Centrex/Tandem FS
		•	Primary AIN FS
		SETs on MIB columns
		•	MGW
		•	TG
		•	Subscriber Termination
		•	Trunk Termination
		•	SCTP Association
Viewing groups of		GET/GETNEXT on the following branch:
BTS components		.iso.org.dod.internet.private.enterprises.ipcell.opticall.statusControlBulk
		•	MGW
		•	TG
		•	Subscriber Termination
		•	Trunk Termination
		The Status Value column displays components as follows:
		• ; = separates each instance of a BTS component
		• = separates status fields
		• enumerated states are the same as the component’s OAMPTable
		• . = separates CIC and TGN_ID

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

OL-16000-07 7-5