Cisco Systems 10200 manual Changing media gateways, Viewing media gateway test, Menus

Chapter 5 Managing External Resources

Managing Gateways

Table 5-7 Managing Gateways (continued)

Task	Sample Command
Changing media gateways	control mgw id=c5300_162; mode=forced; target-state=INS;
status	Modes can be forced or graceful. Forced tears down all calls
	immediately; graceful allows calls in progress to complete before
	teardown.
	Note Rules for changing an MGW states are in Figure 5-1.
	control mgw id=c2421.65; mode=forced; target-state=maint;
	Forces MAINT state, do this before testing
Viewing media gateway test	diag mgw test= <TAB>
menus	or
	diag mgw test= <RETURN>
Testing media gateways	diag mgw id=ubr-03; test=1;
(place gateways in MAINT
state first)

If a gateway command fails, you might receive one of the following generic failure reasons, or one specific to the command.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07		5-17