Cisco Systems 10200 manual Full Database Auditing, Checking Shared Memory, From CA/FS Side a

Chapter 3 Monitoring and Backing Up the BTS

Exporting Provisioned Data

Full Database Auditing

Step 1 Log in as CLI user on EMS side A.

Step 2 Enter audit database type=full;.

Step 3 Check the audit report and verify that there is no mismatch or error. If errors are found, try to correct the errors. If you cannot make the correction, contact Cisco TAC.

Checking Shared Memory

This task checks shared memory to detect potential data problems.

From CA/FS Side A

Step 1	Log in as root.
Step 2	Enter:
	<hostname># cd /opt/OptiCall/CAxxx/bin
	<hostname># ca_tiat data
	Press Enter.
	The result should match the following:
	All tables are OK.
	For details, see ca_tiat.out
	Caution	If the result is not“All tables are OK”, stop and contact Cisco TAC. If the result is “All tables
		are OK”, go to Step 3.
Step 3	Enter:
	<hostname># cd /opt/OptiCall/FSPTCzzz/bin <Return>
	<hostname># potsctx_tiat data <Return>
	Press Enter.
	The result should match the following:
	All tables are OK.
	For detail, see potsctx_tiat.out
	Caution	If the result is not“All tables are OK”, stop and contact Cisco TAC. If the result is “All tables
		are OK”, go to Step 4.
Step 4	Enter:
	<hostname>#cd /opt/OptiCall/FSAINyyy/bin
	<hostname>#ain_tiat data
Step 5	Press Enter.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
3-16	OL-16000-07