Cisco Systems 10200 CW Tone, Cidcw, CW Type, Stutter Tone, Tones OFF, Alerting Pattern, Dial Tone

Appendix A Feature Tones

Tones per Feature

Table A-1	Feature Tones (continued)
Feature		Tone	Condition(s) That Initiate Tone1
CW		CW TONE	If called party has MDN feature: primary DN matched.
CIDCW			If called party is in Centrex system with DACWI: there is no extension
			for the number dialed.
			If called party has DRCW feature: calling party is not on the DRCW
			screening list.2
		CW TYPE 2	If called party has MDN feature: second DN matched.
			If called party is in Centrex system with DACWI: extension exists for the
			number dialed.
		CW TYPE 3	If called party has MDN feature: third DN matched.
		CW TYPE 4	If called party has DRCW feature: calling party is on the DRCW
			screening list.2
		STUTTER TONE	For Centrex subscriber with CHD feature and currently on an active call:
			A third party calls in, and the called party hears a call-waiting tone. The
			called party presses Flash button or switchhook to place the current
			remote station on hold, and hears the stutter tone.
			The called party has the following options:
			• Press Flash button or switchhook again to return to the original call.
			• Dial a designated vertical service code (VSC)—typically *52—to be
			connected to the new calling party; the first calling party is kept
			on hold.
		TONES OFF	No tones are played for CW or CIDCW. (Tones are turned off under
			certain special circumstances.)
		ALERTING PATTERN 1	Alerting pattern (ringing) is provided to the calling party and
			called party, as applicable, for all reconnect, re-ring, callback and
			recall scenarios.
CCW		CONFIRMATION TONE	The subscriber in two-way call cancels call waiting.
		DIAL TONE	POTS or Centrex subscriber picks up phone to cancel call waiting.
		STUTTER TONE	The subscriber places the other party on hold (CHD) and then activates
			CCW while call is still on hold.
		ALERTING PATTERN 1	The subscriber goes on hook with the other party still on hold; the BTS
			provides alerting pattern (ringing).
CDP		DIAL TONE	The subscriber is granted access to an outside (public) line, typically
			after dialing 9.
		ALERTING PATTERN 3	Member of a Centrex group receives an incoming call from the
			group attendant.
CFU		REMINDER RING TONE	Alerting pattern (ringing) is provided on the called station to indicate that
			a call has been received and automatically forwarded.

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

A-2 OL-16000-07