Cisco Systems 10200 CFU-ACT Stutter Tone, CFU-DEACT Confirmation Tone, Cfna-Act, Cfna-Deact, Cnam

Appendix A Feature Tones

Tones per Feature

Table A-1	Feature Tones (continued)
Feature		Tone	Condition(s) That Initiate Tone1
CFU-ACT		STUTTER TONE	The subscriber has successful activated CFU from the handset.
		DIAL TONE	The subscriber has dialed the CFU-ACT star code, and the BTS is ready
			to receive digits for the forward-to DN.
			1-second timer elapses following the confirmation tone.
		CONFIRMATION TONE	Centrex subscriber successfully activates extension forwarding.
			If the subscriber has multiple call forwarding (MCF), the subscriber has
			successfully activated a chain call forwarding scenario
			POTS subscriber receives ROUTE SELECTED DIALING PLAN.
		REORDER TONE	The CFU-ACT attempt was not successful due to
			• Attempt to activate CFU when it was already activated
			• Attempt to forward calls to a DN that could not be reached
			• Attempt to forward call from a DN to itself.
CFU-DEACT		CONFIRMATION TONE	The subscriber successfully deactivates CFU.
		DIAL TONE	1-second timer elapses following the confirmation tone.
		REORDER TONE	The subscriber attempts to deactivate CFU when it was already
			deactivated
CFB-ACT and		DIAL TONE	The subscriber has dialed the CFB-ACT or CFNA-ACT star code, and the
CFNA-ACT			BTS is ready to receive digits for the forward-to DN.
		CONFIRMATION TONE	The subscriber successfully activates CFB or CFNA.
		DIAL TONE	1-second timer elapses following the confirmation tone.
CFB-DEACT and		CONFIRMATION TONE	The subscriber has dialed the CFB-DEACT or CFNA-DEACT star code,
CFNA-DEACT			and CFB or CFNA has been deactivated.
		DIAL TONE	Issued after a 1-second timer elapses following the confirmation tone.
CHD		STUTTER TONE	For Centrex subscriber (controlling party) currently on an active call:
			The controlling party places the other party on hold by pressing the Flash
			button or switchhook, and hears the stutter tone.
			Controlling party has the following options:
			• Press Flash button or switchhook again to return to the original call.
			• Dial a designated vertical service code (VSC)—typically *52—hear
			the stutter tone again, then dial a third party. The first calling party
			is kept on hold.
		ALERTING PATTERN 1	Alerting pattern (ringing) is provided to the calling party and
			called party, as applicable, for all reconnect, re-ring, callback and
			recall scenarios.
CNAM		No tone
CND

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

OL-16000-07 A-3