Cisco Systems 10200 manual Shut No shut, Ca102 dladm show-dev

Chapter 5 Managing External Resources

Provisioning the GigE Interface

shut

no shut

Step 5 Save the switch configuration.

Step 6 Reboot the Cisco BTS 10200 host using the shutdown -g0-y-i6command. We recommend that you execute the shutdown command using the console port to avoid loss of connectivity during the reboot. After the reboot, all the targeted Cisco BTS 10200 applications should automatically restart and go into standby state.

Step 7 Verify interface speed and duplex mode by executing the following command on the host:

dladm show-dev Example output:

ca102> dladm show-dev

bge0 link: up speed: 1000 Mbps duplex: full

bge1 link: up speed: 1000 Mbps duplex: full

bge2 link: up speed: 1000 Mbps duplex: full

bge3 link: up speed: 1000 Mbps duplex: full

Step 8 Repeat for the other UNIX hosts in the Cisco BTS 10200 system.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07		5-29