Cisco Systems 10200 manual Checking BTS System Health, Tasks Frequency

Chapter 3 Monitoring and Backing Up the BTS

Checking BTS System Health

•Partitions consumed:

–A partition 70 percent consumed generates a minor alarm.

–A partition 80 percent consumed generates a major alarm.

–A partition 90 percent consumed generates a critical alarm.

Table 3-1 Managing Hardware

Task	Sample Command
Running node reports	report node node=prica42;
	Note Results may take a few minutes to display.
Viewing nodes	status node node=prica42;
Rebooting the host machines	control node node=prica42; action=REBOOT;
	Caution Use this command with extreme caution.
Setting the host machine for	control node node=prica42; action=HALT;
maintenance
	Caution Use local consoleaccess or a power cycle to restart the
		node.

Checking BTS System Health

Do the following tasks as listed or more frequently if your system administrator recommends it.

.

		Table 3-2	BTS System Health Checklist
		Tasks		Frequency
			Moving Core Files	as alarms are
				receieved
			Using BTS System-Health Reports	Daily
			Checking BTS System Time	Daily
			Checking Traffic Measurements	Daily
			See Chapter 6, “Using Measurements.”
			Checking Event and Alarm Reports	Daily
			See Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 6.0.1.
			Checking the OS Log of Each Host Machine	Daily
			Backing up the EMS Database	Daily
			Checking Disk Mirroring on Each Host Machine	Weekly
	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
3-2				OL-16000-07