Cisco Systems 10200 manual Call Processing Measurements

Chapter 6 Using BTS Measurements

Learning the Measurement Types

Call Processing Measurements

Table 6-3		Call Processing Measurements
			Description
	Measurement		(* = rapid count could mean a potential problem in the system)
	CALLP_ NCT_TEST_FAIL		Unsuccessful Network Continuity Tests completed, both call setup failures and
			resource failures. These are test calls abnormally released by the CA due to resource
			priorities.
	CALLP_ NLB_TEST_FAIL		Unsuccessful Network Loop Back Tests completed. This includes both call setup
			failures and resource failures. These are test calls abnormally released by the CA due
			to reasons such as resource priorities.
	CALLP_ NLB_TEST_SUCC		Successful Network Loop Back Tests completed.
	CALLP_CALL_ABAND		Originating call attempts of all types abandoned.
	CALLP_CALL_SUCC		Successful originating and terminating call attempts of all types.
	CALLP_CAS_CALL_ABAND		CAS originating call attempts abandoned.
	CALLP_CAS_CALL_SUCC		Successful CAS originating and terminating call attempts.
	CALLP_CAS_CAS_CALL		Successfully completed calls from an CAS originator to an CAS terminator.
	CALLP_CAS_H323_CALL		Successfully completed calls from a CAS originator to an H323 terminator.
	CALLP_CAS_ISDN_CALL		Successfully completed calls from an CAS originator to an ISDN terminator.
	CALLP_CAS_MGCP_CALL		Successfully completed calls from an CAS originator to an MGCP terminator.
	CALLP_CAS_ORIG_ATTMP		Originating CAS call attempts.
	CALLP_CAS_ORIG_FAIL		CAS originating call attempts that failed.
	CALLP_CAS_SIP_CALL		Successfully completed calls from an CAS originator to an SIP terminator.
	CALLP_CAS_SS7_CALL		Successfully completed calls from an CAS originator to an SS7 terminator.
	CALLP_CAS_TERM_ATTMP		CAS terminating call attempts.
	CALLP_CAS_TERM_FAIL		CAS terminating call attempts that failed.
	CALLP_EMGNCY_ATTMP		Emergency call attempts.
	CALLP_EMGNCY_CALL_ABAND		Emergency call origination attempts abandoned.
	CALLP_EMGNCY_CALL_SUCC		Emergency call attempts that completed successfully.
	CALLP_EMGNCY_FAIL		Emergency call attempts that failed.
	CALLP_H323_CALL_ABAND		Terminating and originating H323 call attempts abandoned.
	CALLP_H323_CALL_SUCC		Originating and terminating H323 call attempts that completed successfully.
	CALLP_H323_CAS_CALL		Successfully completed calls from an H323 originator to a CAS terminator.
	CALLP_H323_H323_CALL		Successfully completed calls from an H323 originator to an H323 terminator.
	CALLP_H323_ISDN_CALL		Successfully completed calls from an H323 originator to an ISDN terminator.
	CALLP_H323_MGCP_CALL		Successfully completed calls from an H323 originator to an MGCP terminator.
	CALLP_H323_ORIG_ATTMP		Originating H323 call attempts.
	CALLP_H323_ORIG_FAIL		Originating H323 call attempts that failed.
	CALLP_H323_SIP_CALL		Successfully completed calls from an H323 originator to a SIP terminator.
	CALLP_H323_SS7_CALL		Successfully completed calls from an H323 originator to an SS7 terminator.
			Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
	OL-16000-07			6-5