Cisco Systems 10200 Specific to the command, Command Entered Response Possible Conditions, Status

Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-3	Valid Normal Trunk Termination States (continued)
State/Token			ADMIN-STATE			OPER-STATE	STATIC-STATE	DYNAMIC-STATE
IDLE			INS			IDLE	ACTV	IDLE
ACTIVE INCOMING			INS			IDLE	ACTV	IDLE
ACTIVE OUTGOING			INS			ACTIVE	ACTV	OBSY
TRANSIENT			INS			ACTIVE	ACTV	IBY-TRNS
INCOMING
TRANSIENT			INS			BUSY	ACTV	OBSY-TRNS
OUTGOING
		If a TG or trunk command fails, it can return one of the following generic failure reasons, as well as ones
		specific to the command.
		Table 5-4		Understanding Trunk Group and Trunk Generic Command Responses
		Command		Command
		Entered		Response	Possible Conditions
		status		Failure	TG or trunk database was not found in shared memory.
		or			Component is already in the requested state.
		control			Graceful mode only. Appears when a command is executed and operation
					is INS going OSS or INS going MAINT.
					A required resource is not available.
						For ISDN
						– A trunk cannot be added unless both the MGW and TG are
						available.
						– A TG cannot be added unless the MGW is available, and vice
						versa.
						For SS7, CAS, Announcement
						– A trunk cannot be added unless both the MGW and TG are
						available.
						– A TG does not require the MGW to be available, and vice versa.
					An associated resource of the database cannot be found.
					An assigned resource is not valid (supported).

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

OL-16000-07 5-7