Cisco Systems 10200 manual OL-16000-07

Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-4	Understanding Trunk Group and Trunk Generic Command Responses (continued)
Command	Command
Entered	Response	Possible Conditions
Trunk	Failure	• NON-FAULTY—Not blocked, available for service.
commands		• MAINT-OOS—Trunk-termination is manually controlled OOS.
		• MAINT-BUSY—Trunk-termination is in maintenance state;
		controlled to MAINT.
		• TERM-FAULT—Bearer termination is in faulty condition.
		• SIGNALLING-FAULT—Signaling link (for example, SS7 link, or
		ISDN D channel) is faulty.
		• MAINT-BLOCK—Trunk-termination is manually controlled OOS
		(controlled mode=GRACE).
		• HARDWARE-BLOCK—Trunk-termination is manually controlled
		OOS (controlled mode=FORCED).
		• OUTGOING_RESTRICTED—The outgoing call is not allowed
		• DPC_INACCESSIBLE—The DPC is not accessible.
		• ACL_CONGESTION_LEVEL_1—Automatic Congestion Level
		(ACL) congestion is at level 1.
		• ACL_CONGESTION_LEVEL_2—ACL congestion is at level 2.
		• ACL_CONGESTION_LEVEL_3—ACL congestion is at level 2.
		• TFC_CONGESTION_LEVEL_1—Transfer Controlled (TFC)
		congestion is at level 1.
		• TFC_CONGESTION_LEVEL_2—TFC congestion is at level 2.
		• TFC_CONGESTION_LEVEL_3—TFC congestion is at level 3.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
5-10	OL-16000-07