Cisco Systems 10200 manual Tones per Feature, Feature Tone Conditions That Initiate Tone1

A P P E N D I X A

Feature Tones

Revised: February 18, 2010, OL-16000-07

Introduction

This appendix explains special tones the BTS supports for subscriber and operator features.

The BTS supports these tones by sending MGCP messages to the gateways.

Tones per Feature

Table A-1		Feature Tones
	Feature		Tone		Condition(s) That Initiate Tone1
	AC		ALERTING PATTERN 3
	ACR		No tone
	ACRA		CONFIRMATION TONE		Anonymous call rejection (ACR) was successfully activated or
	ACRD				deactivated by subscriber actions.
			REORDER TONE		ACR was not successfully activated or deactivated by subscriber actions.
	AR		ALERTING PATTERN 3
	BLV/OI		REORDER TONE		Normal access is not available.
					There is a local office problem.
					The line is momentarily unavailable.
					No-test access is not available.
			BUSY VERIFICATION		CFU is activated on the terminating line.
					Terminating line is a data-only line or a denied line.
			PERMANENT SIGNAL		Line up to receiver off-hook tone.
			TONE		Terminating line receiving a permanent signal announcement.
					Terminating line is high and wet (battery and ground shorted) or high and
					dry (off hook for an extended period).
				Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
	OL-16000-07					A-1