Cisco Systems 10200 Cndb Dial Tone, Cnab, Cidb Cids COS Confirmation Tone, Cprk Reorder Tone

Appendix A Feature Tones

Tones per Feature

Table A-1	Feature Tones (continued)
Feature		Tone	Condition(s) That Initiate Tone1
CNDB		DIAL TONE	The subscriber has dialed the star code for the identity blocking feature,
CNAB			and the BTS is ready to receive digits for the DN to be called.
CIDB
CIDS
COS:		CONFIRMATION TONE	The BTS prompts the subscriber to enter the account code.
Account Codes
COS:		CONFIRMATION TONE	The BTS prompts the subscriber to enter the authorization code.
Authorization Codes
CPRK		REORDER TONE	The subscriber has dialed the call park (CPRK) access code, but is not
			subscribed to the CPRK feature.
			The subscriber has CPRK and has dialed the CPRK access code, but the
			CPRK attempt was not successful.
			Note In this case (CPRK attempt was not successful), the reorder tone
			is played for two seconds, and then the subscriber is reconnected
			to the original call.
		STUTTER TONE	The subscriber presses Flash button or switchhook to park the call.
CPRK_RET		REORDER TONE	The subscriber has CPRK and has dialed the CPRK access code, but is
			unable to retrieve the call.
		STUTTER TONE	The subscriber enters the CPRK_RET access code, and the BTS is
			waiting for the subscriber to dial the extension against which the parked
			call should be retrieved.
CT/TWC		ALERTING PATTERN 1	The subscriber hangs up with one party on hold.
DACWI		ALERTING PATTERN 3	Distinctive ring pattern.
DPN		STUTTER TONE	The subscriber has dialed DPN access code, and DPN access has been
			granted.
		REORDER TONE	Reorder tone is returned to the subscriber who initiated a DPN
			request when any of the following occurs:
			• The DPN feature has not been assigned to the requesting line.
			• The dialed extension is not assigned in the business group
			dialing plan.
			• The line associated with the dialed extension is not being rung.
			(Note that “being rung” should not include being given
			call-waiting treatment.)
			• The call has been answered, picked up, or abandoned.
			• The requesting line is not allowed to pick up the particular call
			because of being assigned the fully restricted terminating or the
			denied termination feature.

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

A-4 OL-16000-07