Cisco Systems 10200 manual Trunk Group Usage Measurements

Chapter 6 Using BTS Measurements

Learning the Measurement Types

Trunk Group Usage Measurements

Table 6-39 Trunk Group Usage Measurements

		Description
Measurement		(*=rapid count could mean a potential problem in the system)
TRKGRP_401S_SENT
TRKGRP_AVERAGE_USAGE		The percent of the trunk group used, between 0-100. This is not incremented for SIP or
		H323 trunk groups.
		TRKGRP_AVERAGE_USAGE = 100 * (TRKGRP_TOTAL_USAGE * (100/60)) / (
		TRKGRP_TOTAL_TRK * STATISTICS_INTERVAL_MINUTES )
TRKGRP_EXCHANGE		The CLLI code from the POP table of the reporting trunk group.
TRKGRP_GLARE_COUNT		Attempts by the local and remote switch to use the same CIC on a 2-way trunk group.
		When glare is enmeasuremented and pegged here, the TRKGRP_OUTGOING_ATTMP
		measurement is NOT pegged. This is not incremented for SIP or H323 trunk groups.
TRKGRP_ID		The ID number of the reporting trunk group.
TRKGRP_INBOUND_FAIL		Number of failed inbound calls on a SIP trunk. However, calls that fail for Abandon,
		User busy, or No answer scenarios are not pegged.
TRKGRP_INBOUND_SUCC		Number of established inbound calls on a SIP trunk.
TRKGRP_INCOM_ATTMP		Times the system recognizes an incoming seizure for any trunk within the reporting
		trunk group:
		• In the case of a SIP trunk, this is incremented for every Invite received on a trunk.
		• In the case of an H.323 trunk, this is incremented for each Incoming Setup received
		on a trunk when not associated with a H.323 subscriber.
TRKGRP_INCOM_BUSY_TRK		Summation (CCS based) of trunk circuits within the reporting trunk group marked as
		busy with terminating calls taken every 100 seconds during the interval. This is not
		incremented for SIP or H323 trunk groups.
TRKGRP_INCOM_CALL_ABDN		Number of incoming abandoned SIP trunk calls at the reporting call agent.
		For SIP trunks only.
TRKGRP_INCOM_CALL_NOT_		Number of incoming SIP trunk calls not answered by a called party.
ANS		For SIP trunks only.
TRKGRP_INCOM_END_USR_B		Number of incoming SIP trunk calls not completed because the called party was busy.
USY		For SIP trunks only.
TRKGRP_INCOM_USAGE		Summation (CCS based) of trunk circuits within the reporting trunk group marked as
		busy or in the maintenance state with terminating calls taken every 100 seconds during
		the interval.
		This is mapped to the same value as the TRKGRP_INCOM_BUSY_TRK in this release.
		This will be re-implemented to account for the MAINT state in a later release.
TRKGRP_LBLK_TRK_USAGE		The CCS value for trunks that are Local Blocked in the reporting trunk group for this
		reporting period. This is not incremented for SIP or H323 trunk groups.
TRKGRP_NAME		The remote switch CLLI code and trunk group type of the reporting trunk group.
TRKGRP_OOS_TRK_USAGE		The CCS value for OOS trunks in the trunk group for this period. This is not
		incremented for SIP or H323 trunk groups.
	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
6-68		OL-16000-07