Cisco Systems 10200 Trkgrpoutboundfail, Trkgrpoutboundsucc, Trkgrpoutgattmp, Trkgrpoutgbusytrk

Chapter 6 Using BTS Measurements

Learning the Measurement Types

Table 6-39		Trunk Group Usage Measurements (continued)
			Description
	Measurement		(*=rapid count could mean a potential problem in the system)
	TRKGRP_OUTBOUND_FAIL		Times the system tries to access any trunk for an outbound call unsuccessfully within
			the reporting trunk group:
			• In the case of a SIP trunk, this is incremented for each outgoing initial Invite request
			failure over a SIP trunk. For each failure response received over a trunk for any
			other failure causing failure of the outbound call setup. If an Invite is cancelled, the
			measurement for failure is not incremented as this includes just an outbound call.
			• This counter does not include the follwoing types of SIP calls: Abandon, User busy,
			No answer.
			• In the case of an H.323 trunk, this is incremented for each Outgoing Setup sent on
			a trunk that failed when not associated with a H.323 subscriber.
	TRKGRP_OUTBOUND_SUCC		Number of established outbound calls on a SIP trunk.
	TRKGRP_OUTG_ATTMP		Times the system tries to access any trunk for an outbound call within the reporting
			trunk group:
			• In the case of a SIP trunk, this is incremented for each received SetupReq request
			for a SIP trunk.
			• In the case of an H.323 trunk, this is incremented for each Outgoing Setup sent on
			a trunk when not associated with a H.323 subscriber.
	TRKGRP_OUTG_BUSY_TRK		Summation (CCS based) of trunk circuits within the reporting trunk group marked as
			busy with originating calls taken every 100 seconds during the interval. This is not
			incremented for SIP or H323 trunk groups.
	TRKGRP_OUTG_CALL_ABDN		Number of outgoing abandoned SIP trunk calls at the reporting call agent.
			For SIP trunks only.
	TRKGRP_OUTG_CALL_NOT_A		Number of outgoing SIP trunk calls not answered by a called party.
	NS		For SIP trunks only.
	TRKGRP_OUTG_END_USR_BU		Number of SIP trunk calls not completed because the called party was busy.
	SY		For SIP trunks only.
	TRKGRP_OUTG_USAGE		Summation (CCS based) of trunk circuits within the reporting trunk group marked as
			busy or in the maintenance state with originating calls taken every 100 seconds during
			the interval.
			This is mapped to the same value as the TRKGRP_OUTG_BUSY_TRK in this release.
			This will be re-implemented to account for the MAINT state in a later release.
	TRKGRP_RBLK_TRK_USAGE		The CCS value for trunks that are Remote Blocked in the reporting trunk group for this
			reporting period. This is not incremented for SIP or H323 trunk groups.
	TRKGRP_REGISTERS_RECVD
	TRKGRP_SIP_3xx_RX		Number of 3xx class (REDIRECTION) messages the reporting call agent received on a
			SIP trunk group.
	TRKGRP_SIP_3xx_TX		Number of 3xx class (REDIRECTION) messages the reporting call agent transmitted on
			a SIP trunk group.
	TRKGRP_SIP_4xx_RX		Number of 4xx class (REQUEST FAILURES) messages the reporting call agent
			received on a SIP trunk group.
			Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
	OL-16000-07			6-69