
Chapter 3 Monitoring and Backing Up the BTS
Moving Core Files
Adding Static Routes
To add static routes to all Cisco BTS 10200 systems, perform the following steps:
Step 1 From the shell or window of the primary call agent, change directory to /opt/utils.
cd /opt/utils
Step 2 Edit S96StaticRoutes using an editor.
Step 3 Add the subnet of NTP server, DNS server, external archive server and any other machine to the file, which user wants to have access to Cisco BTS 10200 system in the following format:
route add
Note All NTP, DNS traffic, traffic to external archive server, and traffic from other machine to Cisco BTS 10200 system (eg. login), should all go through management networks. (i.e. network gateway in management network). This is particularly important in CA system because CA has both management and signaling network. If user does not specify explicitly in this file, those traffic will be directed to signaling network, because signaling network is the default one in CA/FS.
Step 4 Make sure there is a soft link pointing from /etc/rc3.d/S96StaticRoutes to /opt/utils/S96StaticRoutes.
ls
Step 5 After editing, close the file, and run S96StaticRoutes.
/etc/rc3.d/S96StaticRoutes
Step 6 Repeat Step 1 to Step 5 on the secondary CA.
Step 7 Verify the connectivity by pinging the DNS server, NTP server, external archive server, or any machine that user just added in that file.
LAF Alarm Information
Refer to the following link to see the LAF alarm information.
Document Name | Link to the Document |
|
|
Cisco BTS 10200 Troubleshooting Guide | http://www.cisco.com/en/US/docs/voice_ip_comm/bts/ |
| 6.0/troubleshooting/guide/07tg01.html#wp1938289 |
|
|
Moving Core Files
BTS creates and stores core files in the bin directory for the binary executable that generated the core. Core files are large
|
| Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
| ||