Cisco Systems 10200 CALLPMGCPSS7CALL, Callpmgcptermattmp, Callpmgcptermfail, Callpmodemmediasetup

Chapter 6 Using BTS Measurements

Learning the Measurement Types

Table 6-3		Call Processing Measurements (continued)
			Description
	Measurement		(* = rapid count could mean a potential problem in the system)
	CALLP_MGCP_SS7_CALL		Successfully completed calls from an MGCP originator to an SS7 terminator.
	CALLP_MGCP_TERM_ATTMP		MGCP terminating call attempts.
	CALLP_MGCP_TERM_FAIL		MGCP terminating call attempts that failed.
	CALLP_MODEM_MEDIA_SETUP_		Failed Modem calls. These calls fail because of resource or priority limits.
	FAIL
	CALLP_MODEM_MEDIA_SETUP_		Successfully completed Modem calls.
	SUCC
	CALLP_NAS_ADMIN_REBOOT		Admin Reboot - Reason Code 807 - that are received in the DLCX messages.
	CALLP_NAS_ADMIN_RESET		Admin Reset - Reason Code 806 - that are received in the DLCX messages.
	CALLP_NAS_AUTH_FAIL		Failed NAS Authentication Requests.
	CALLP_NAS_AUTH_SUCC		Successful NAS Authentication Requests.
	CALLP_NAS_CALLBACK		NAS Callback - Reason Code 816 - that are received in the DLCX messages.
	CALLP_NAS_CLD_UNACC		NAS calls that failed on the reporting CA due to the called party number being
			blocked
	CALLP_NAS_CLG_UNACC		NAS calls that failed on the reportingCA due to the calling party number being
			blocked
	CALLP_NAS_HOST_REQUEST		Host Request - Reason Code 818 - that are received in the DLCX messages.
	CALLP_NAS_IDLE_TIMEOUT		Idle Timeout - Reason Code 804 - that are received in the DLCX messages.
	CALLP_NAS_ISP_PORT_LIMIT		NAS calls that failed on the reporting CA due to the port limit of a modem being
			exceeded
	CALLP_NAS_LOST_CARRIER		Lost Carrier - Reason Code 802 - that are received in the DLCX messages.
	CALLP_NAS_LOST_SERVICE		Lost Service - Reason Code 803 - that are received in the DLCX messages.
	CALLP_NAS_NAS_ERROR		NAS Error- Reason Code 809 - that are received in the DLCX messages.
	CALLP_NAS_NAS_REBOOT		NAS Reboot- Reason Code 811 - that are received in the DLCX messages.
	CALLP_NAS_NAS_REQUEST		NAS Request - Reason Code 810 - that are received in the DLCX messages.
	CALLP_NAS_NO_MODEMS		NAS calls that failed on the reporting CA due to the unavailability of a modem
	CALLP_NAS_OP_FAIL		Operation failures that occurred on the reporting CA - typically indicative of a
			modem failure
	CALLP_NAS_PORT_ERROR		Port Error- Reason Code 808 - that are received in the DLCX messages.
	CALLP_NAS_PORT_PREEMPTED		Port Pre-empted - Reason Code 813 - that are received in the DLCX messages.
	CALLP_NAS_PORT_SUSPENDED		Port Suspended - Reason Code 814 - that are received in the DLCX messages.
	CALLP_NAS_PORT_UNNEEDED		Port Unneeded - Reason Code 812 - that are received in the DLCX messages.
	CALLP_NAS_SERVICE_UNAVAIL		Service Unavailable - Reason Code 815 - that are received in the DLCX messages.
	CALLP_NAS_SESSION_TIMEOUT		Session Timeout - Reason Code 805 - that are received in the DLCX messages.
	CALLP_NAS_USER_ERROR		User Error - Reason Code 817 - that are received in the DLCX messages.
	CALLP_NAS_USER_REQUEST		User Requests - Reason Code 801 - that are received in the DLCX messages.
	CALLP_NCT_TEST_SUCC		Successful Network Continuity Tests completed.
		Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
	6-8		OL-16000-07