Cisco Systems 10200 manual Command Entered Response Possible Conditions

Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-4 Understanding Trunk Group and Trunk Generic Command Responses (continued)

Command	Command
Entered	Response	Possible Conditions
SS7 trunk	Failure	•	ACT_LOC_INIT_RESET—Reset circuit at startup.
commands		•	ACT_LOC_MML_RESET—Craft reset request.
		•	ACT_LOC_QUERY—Circuit query.
		• ACT_LOC_UPU—Action to perform user part unavailable.
		•	ACT_LOC_VALIDATE—Circuit validation.
		•	ACT_LOC_COTTEST—COT test.
		• ACT_LOC_STOP—Action to stop the call.
		• BLK_LOC_UPU—Trunk is blocked because user part is unavailable.
		• DES_LOC_GRACE—Local hardware RSIP graceful.
		• DES_LOC_SIG—SS7 signaling fault (link fail).
		• DES_LOC_FORCE—Local hardware RSIP forced.
		• DES_LOC_MML—MML; also used for unsolicited blocks from
			MDL due to circuit query reservation (CQR).
		• DES_LOC_UPU—Trunk needs to be blocked because of user part
			unavailability.
		• JOB_PENDING—Ongoing job in progress.
		• JOB_REC—Job was received by the MDL component and is being
			processed.
		• OPER_ACTIVE—Trunk is available for calls.
		• REMOTE_GRACE—Trunk is blocked remotely because of a CLI
			command on the remote switch.
		• REMOTE_FORCE—Trunk is blocked remotely because of a
			hardware failure on the remote switch.
		• RESERVE_SPARE1—Reserved for future use.
		• RESERVE_SPARE2—Reserved for future use.
		• TERM_GRACE—Trunk is gracefully blocked because of an RSIP
			graceful from the MGW.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07		5-11