Cisco Systems 10200 manual State/Token, Uneqp ANY Ueqp Idle Manually OOS Lblk Manually Main Maint

Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-2 Managing Trunk Groups (continued)

Task	Sample Command
Testing trunks	SS7 trunks
(place in MAINT state first)	diag ss7-trunk-termination tgn-id=103; cic=13; test=1;
	Test 1: SS7 MGCP Connectivity Test—tests if MGCP has access to
	the SS7 trunk termination
	Test 2: SS7 Termination Connection Test—tests if there is a path to the
	device (ping).
	Test 3: SS7 COT Test—tests the integrity of the SS7 Bearer Path.
	Test 4: SS7 CQM Test—queries the SS7 circuit (or group of circuits)
	status. A range of CICs can be specified (to a maximum of 24). Both
	remote and local trunk states are displayed in the results.
	Test 5: SS7 CVT Test—tests to ensure that each end of the circuit has
	sufficient and consistent information for using the circuit in call
	connections. CLLI names are included.
	Test 6: SS7 CIC Audit—returns status of CICs
	Test 0: ALL—performs tests 1 through 6.
	ISDN trunks
	diag isdn-trunk-termination test=1; tgn-id=17; cic=1;
	1.	Tests if MGCP has access to the ISDN termination
	2.	Tests if there is a path to the device (ping)
	3.	Performs tests 1 and 2
	CAS trunks
	diag cas-trunk-termination tgn-id=64;cic=1;test=1;
	1.	Tests if MGCP has access to the CAS termination
	2.	Tests if there is a path to the device (ping)
	3.	Performs tests 1 and 2
	Announcement trunks
	diag annc-trunk-termination;test=1;tgn-id=13;cic=1
	1.	Tests if MGCP has access to the ANC termination
	2.	Tests if there is a path to the device (ping)
	3.	Performs tests 1 and 2

Table 5-3 Valid Normal Trunk Termination States

State/Token		ADMIN-STATE	OPER-STATE	STATIC-STATE	DYNAMIC-STATE
UNEQP		UNEQP	ANY	UEQP	IDLE
MANUALLY OOS		OOS	ANY	LBLK	IDLE
MANUALLY MAIN		MAINT	IDLE	LBLK	IDLE
	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
5-6					OL-16000-07