Cisco Systems 10200 manual Learning External Resource Dependencies, CLIshow billing-acct-addr

Chapter 5 Managing External Resources

Learning External Resource Dependencies

Table 5-9 Managing External Resources (continued)

Task	Sample Command
Ensuring billing server	1.	On both the primary and secondary EMS enter:
receives Call Detail Blocks	CLI>show billing-acct-addr
(CDBs)
	2.	Note the polling interval.
	3.	Log in to the billing server.
	4.	Ensure it receives billing files every XX minutes from the BTS,
		where XX = polling interval.
Clearing billing directory
	Caution Remove only transferred or secondary files. Never remove
			primary files, you need these to collect revenue.
	1.	Check the default format secondary files:
		<billing-file-prefix>-<call-agent-id>-(0/1){+/-}HHMMSS
		-yyyymmdd-hhmmss-<sequence-number>-<S>

where S=secondary state

2.Check the PacketCable-specific format secondary files:

<billing-file-prefix>_yyyymmddhhmmss_<priority>_<1>_<c ms-id>_<sequence-number>.ascii[.tmp]

where 1=secondary record-type

3.On the secondary EMS enter <hostname>#df –k

4.Ensure the /opt directory is not more than 70% full.

If the /opt directory is >70% full, remove obsolete scripting files and other user-generated files. Also remove obsolete files from the backup directory. For help call Cisco TAC.

Learning External Resource Dependencies

Table 5-10	RGW and Subscriber Termination States
RGW State		Allowed Subscriber Termination States
OOS		•	OOS
		•	UEQP

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
5-20	OL-16000-07