Cisco Systems 10200 manual Command Entered Response Possible Conditions

Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-4	Understanding Trunk Group and Trunk Generic Command Responses (continued)
Command	Command
Entered	Response	Possible Conditions
Trunk	Failure	•	The transaction could not be executed due to a transient error, the
Termination			endpoint is unknown, the endpoint is not ready, endpoint does not
commands			have enough resources available, a protocol error was detected, the
			command contained an unrecognized extension, the endpoint is
			restarting.
		• Invalid conn identifier, invalid call ID.
		• Unsupported mode or invalid mode, unsupported or unknown
			package.
		• Endpoint does not have a digit map, endpoint redirected to another
			Call Agent, endpoint malfunctioning, endpoint taken out of service.
		• No such event or signal.
		• Unknown action or illegal combination of actions.
		• Internal consistency in local connection options, unknown extensions
			in local connection options, unsupported values on local connection
			options.
		•	Insufficient bandwidth.
		• Missing remote connection descriptor.
		•	Incompatible protocol version.
		•	Internal hardware failure.
		• CAS signaling protocol error.
		• Failure of a group of trunks.
		•	Response too big.
		• Loss of lower connectivity.
		• No fault reason available.

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

OL-16000-07 5-9