Cisco Systems 10200 manual Announcement Measurements, Protocol Measurements

Chapter 6 Using BTS Measurements

Learning the Measurement Types

Announcement Measurements

Table 6-40	Announcement Measurements
		Description
Measurement		(*=rapid count could mean a potential problem in the system)
ANM_SEASONAL_SUSPEND		calls that cause the CA to play the seasonal suspend announcement.
ANM_CKT_UNAVAIL		calls resulting in the playing of the circuit unavailable announcement
ANM_CALL_REJECTED		calls resulting in the playing of the call rejected announcement
ANM_ADDR_INCOMPLETE		calls resulting in the playing of the address incomplete announcement
ANM_FAC_REJECTED		calls resulting in the playing of the facility rejected announcement
ANM_PRE_0_1_ABSENT		calls resulting in the playing of the prefix of 0 or 1 absent announcement
ANM_PRE_0_1_PRESENT		calls resulting in the playing of the prefix 0 or 1 present announcement
ANM_HNPA_ABSENT		calls resulting in the playing of the HNPA area code announcement
ANM_NO_ROUTE_DEST		calls resulting in the playing of the no route to destination announcement
ANM_UNALLOCATED_NUM		calls resulting in the playing of the unallocated directory number announcement
ANM_NUM_CHANGED		calls resulting in the playing of the directory number changed announcement
ANM_DEST_OUTOFORDER		calls resulting in the playing of the destination out of order announcement
ANM_TEMP_DISCONNECT		calls resulting in the playing of the temporarily disconnected announcement
ANM_FEAT_NOT_SUBS		calls resulting in the playing of the feature not subscribed to announcement
ANM_AUTHCODE_INVALID		calls resulting in the playing of the authorization code invalid announcement
ANM_NO_RTE_TRANSITNW		calls resulting in the playing of the no route to specified network announcement
ANM_CAUSE_UNKNOWN		calls resulting in the playing of the cause unknown announcement
ANM_EMG_CKT_UNAVAIL		calls resulting in the playing of the “No Emergency Circuit Available” announcement.

H.323 Protocol Measurements

Table 6-41 H.323 Protocol Measurements

	Description
Measurement	(*=rapid count could mean a potential problem in the system)
H323_SETUP_RX	H323	SETUPs received
H323_SETUP_TX	H323	SETUPs transmitted
H323_SETUP_FAIL	H323 SETUPs that failed. The failure is due to one of the following scenarios:
	unable to send due to full socket queue, unable to compose message due to
	invalid socket, or lack of available memory.
H323_CONNECT_RX	H323 CONNECTs received
H323_CONNECT_TX	H323	CONNECTs transmitted
H323_CONNECT_FAIL	H323 CONNECT CONFIRMs that failed. The failure is due to one of the
	following scenarios: unable to send due to full socket queue, unable to
	compose message due to invalid socket, or lack of available memory.
H323_ALERT_RX	H323	ALERTs received
		Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07			6-71