Cisco Systems 10200 manual Sccp Protocol Measurements

Chapter 6 Using BTS Measurements

Learning the Measurement Types

SCCP Protocol Measurements

Table 6-18		SCCP Measurements
			Description
	Measurement		(* = rapid count could mean a potential problem in the system)
	SCCP_ NSAP_OOS_GRANT_TX		Subsystem out-of-service grant messages sent on the reporting FS.
	SCCP_ NSAP_OOS_REQ_TX		Subsystem out-of-service request messages sent on the reporting FS.
	SCCP_ NSAP_PROHIBIT_TX		Subsystem prohibited messages sent on the reporting FS.
	SCCP_ NSAP_STAT_TEST_TX		Subsystem status test messages sent on the reporting FS.
	SCCP_HOP_measurement_FAIL		Routing errors due to a hop measurement violation on the reporting FS.
	SCCP_MSG_TX_BACKUP_SUBSYS		Messages sent to a backup subsystem on the reporting FS.
	SCCP_NETWORK_CONGEST_FAIL		Routing errors due to network congestion on the reporting FS.
	SCCP_NETWORK_FAIL		Routing errors due to a network failure from the point code being unavailable
			on the reporting FS.
	SCCP_NO_TRANS_ADDR_FAIL		Routing errors due to no translation for address of such nature on the reporting
			FS.
	SCCP_NO_TRANS_SPEC_ADDR_FAIL		Routing errors due to no translation for this specific address on the reporting
			FS.
	SCCP_NSAP_ALLOW_MSG_RX		Subsystem allowed messages received on the reporting FS.
	SCCP_NSAP_ALLOW_MSG_TX		Subsystem allowed messages sent on the reporting FS.
	SCCP_NSAP_CONGEST_RX		Subsystem congested messages received on the reporting FS.
	SCCP_NSAP_CONGEST_TX		Subsystem congested messages sent on the reporting FS.
	SCCP_NSAP_OOS_GRANT_RX		Subsystem out-of-service grant messages received on the reporting FS.
	SCCP_NSAP_OOS_REQ_RX		Subsystem out-of-service request messages received on the reporting FS.
	SCCP_NSAP_PROHIBIT_RX		Subsystem prohibited messages received on the reporting FS.
	SCCP_NSAP_STAT_TEST_RX		Subsystem status test messages received on the reporting FS.
	SCCP_SUBSYS_CONGEST_FAIL		Routing errors due to subsystem congestion on the reporting FS.
	SCCP_SUBSYS_FAIL		Routing errors due to a subsystem failure on the reporting FS.
	SCCP_SUBSYS_OOS_REQ_DENY		Subsystem out-of-service requests denied on the reporting FS.
	SCCP_SUBSYS_OOS_REQ_GRANT		Subsystem out-of-service requests granted on the reporting FS.
	SCCP_SYNTAX_ERR		Syntax errors on the reporting FS.
	SCCP_TOTAL_CLASS_0_RX		Class 0 messages received on the reporting FS.
	SCCP_TOTAL_CLASS_0_TX		Class 0 messages sent on the reporting FS.
	SCCP_TOTAL_CLASS_1_RX		Class 1 messages received on the reporting FS.
	SCCP_TOTAL_CLASS_1_TX		Class 1 messages sent on the reporting FS.
	SCCP_TOTAL_EXT_UDATA_RX		Extended unit data received on the reporting FS.
	SCCP_TOTAL_EXT_UDATA_SVC_RX		Extended unit data service received on the reporting FS.
	SCCP_TOTAL_EXT_UDATA_SVC_TX		Extended unit data service sent on the reporting FS.
	SCCP_TOTAL_EXT_UDATA_TX		Extended unit data sent on the reporting FS.
	SCCP_TOTAL_GLOBAL_ADDR_TRAN		Messages requiring global address translation on the reporting FS.
			Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
	OL-16000-07			6-31