Cisco Systems 10200 Callpsiporigcallnota, Callpsiporigendusrbu, Callpsiporigfail, Callpsipsipcall

Chapter 6 Using BTS Measurements

Learning the Measurement Types

Table 6-3		Call Processing Measurements (continued)
			Description
	Measurement		(* = rapid count could mean a potential problem in the system)
	CALLP_SIP_ORIG_CALL_NOT_A		This counter is pegged when the incoming call is not answered by the called party.
	NS
	CALLP_SIP_ORIG_END_USR_BU		This counter is pegged when the incoming call is not complete due to the called party
	SY		being busy.
	CALLP_SIP_ORIG_FAIL		The number of incoming SIP calls that are not established. This counter does not
			include the calls in these conditions:
			• When the call is abandoned by the caller before the called party answers.
			• The called party is busy.
			• The called party is not responding to the incoming call.
	CALLP_SIP_ORIG_SUCC		Number of incoming established SIP calls.
	CALLP_SIP_SIP_CALL		Successfully completed calls from a SIP originator to an SIP terminator.
	CALLP_SIP_SS7_CALL		Successfully completed calls from a SIP originator to an SS7 terminator.
	CALLP_SIP_TERM_ATTMP		SIP terminating call attempts.
	CALLP_SIP_TERM_CALL_ABDN		This counter is pegged when the outgoing call is abandoned by the originator before
			the called party answers.
	CALLP_SIP_TERM_CALL_NOT_A		This counter is pegged when the outgoing call is not answered by the called party.
	NS
	CALLP_SIP_TERM_END_USR_BU		This counter is pegged when the outgoing call is terminated as the called party was
	SY		busy.
			Note The originating and terminating counters are pegged for both originating and
			terminating calls if both are using SIP.
	CALLP_SIP_TERM_FAIL		The number of outgoing SIP calls that are not established. This counter does not
			include the calls in these conditions:
			• When the call is abandoned by the caller before the called party answers.
			• The called party is busy.
			• The called party is not responding to the incoming call.
	CALLP_SIP_TERM_SUCC		Number of outgoing established SIP calls.
	CALLP_SS7_CALL_ABAND		SS7 originating call attempts abandoned.
	CALLP_SS7_CALL_SUCC		Successful SS7 originating and terminating call attempts.
	CALLP_SS7_CAS_CALL		Successfully completed calls from an SS7 originator to an CAS terminator.
	CALLP_SS7_H323_CALL		Successfully completed calls from an SS7 originator to an H323 terminator.
	CALLP_SS7_ISDN_CALL		Successfully completed calls from an SS7 originator to an ISDN terminator.
	CALLP_SS7_MGCP_CALL		Successfully completed calls from an SS7 originator to an MGCP terminator.
	CALLP_SS7_ORIG_ATTMP		Originating SS7 call attempts.
	CALLP_SS7_ORIG_FAIL		SS7 originating call attempts that failed.
	CALLP_SS7_SIP_CALL		Successfully completed calls from an SS7 originator to an SIP terminator.
	CALLP_SS7_SS7_CALL		Successfully completed calls from an SS7 originator to an SS7 terminator.
		Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
	6-10		OL-16000-07