Cisco Systems 10200 manual Command Entered Response Possible Conditions

Chapter 5 Managing External Resources

Managing Subscriber Terminations

Table 5-6	Understanding Subscriber Command Responses (continued)
Command	Command
Entered	Response	Possible Conditions
Any	failure	•	Found no failure, subscriber category invalid, entity unequipped in
			initial state, unknown failure reason(s).
		• Subscriber(s) cannot be found, subscriber(s) state change and
			pending.
		• No termination(s) found in MGW.
		• Fail while in termination table.
		• Administration state invalid, operational state invalid.
		• Failed to allocate IPC message(s), failed to dispatch IPC message(s).
		• Entity in desired state.
		• Not allow subscriber to reset.
		• Change to out-of-service state required.
Subscriber	Failure	•	The media gateway is down, unreachable, in a faulty state,
commands			transitioning to another state.
		• The transaction could not be executed because the endpoint is
			unknown, the endpoint is not ready, the endpoint does not have
			enough resources available, the endpoint is restarting, the command
			contained an unrecognized extension, the gateway is not equipped to
			detect one of the requested events, the gateway is not equipped to
			generate one of the requested signals, the gateway cannot send the
			specified announcement.
		• Invalid conn identifier, invalid call ID.
		• Unsupported mode or invalid mode, unsupported or unknown
			package.
		• Endpoint does not have a digit map, endpoint redirected to another
			Call Agent, endpoint malfunctioning, endpoint taken out of service.
		• No such event or signal.
		• Unknown action or illegal combination of actions.
		• Internal consistency in local connection options, unknown extensions
			in local connection options, unsupported values on local connection
			options.
		•	Insufficient bandwidth.
		• Missing remote connection descriptor.
		•	Incompatible protocol version.
		•	Response too big.
		• Loss of lower connectivity.
		• No fault reason available.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07		5-15