Cisco Systems 10200 manual Data Groups Matching Data from the DN2SUBSCRIBER Table

Chapter 3 Monitoring and Backing Up the BTS

Exporting Provisioned Data

–Non-Native = Y/N

To generate the following reports, use report dn-summary:

•All DNs in NDC and EC

•Thousands group in NDC and EC

•Operating company number (OCN)

•Switch Common Language Location Identifier (CLLI) code

•OCN + CLLI code—entries must match LERG data

Creating Reports for Nonrural Primary and Intermediate Carriers

NRUF reporting for nonrural primary and intermediate carriers:

•Occurs at a thousands-block level (NPA-NXX-X)

•Applies only to NANP

The report returns the following based on the DN2SUBSCRIBER table’s STATUS token:

Table 3-5 NRUF Report Data for Nonrural Carriers

Data Groups	Matching Data from the DN2SUBSCRIBER Table
Assigned DNs	•	Individual DNs:
		ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]; (status=assigned)
		AND ADMIN-DN=N
		ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]; (status=ported-out)
		AND ADMIN-DN=N
	•	DID DNs:
		ndc=<npa>; ec=<nxx>; DN=xxxx; (status=assigned) AND
		ADMIN-DN=N; X 10000
		ndc=<npa>; ec=<nxx>; DN=xxxx; (status=ported-out) AND
		ADMIN-DN=N; X 10000
		ndc=<npa>; ec=<nxx>; DN=[0-9]xxx; (status=assigned) AND
		ADMIN-DN=N; X 1000
		ndc=<npa>; ec=<nxx>; DN=[0-9]xxx; (status=ported-out) AND
		ADMIN-DN=N; X 1000
		ndc=<npa>; ec=<nxx>; DN=[0-9][0-9]xx; (status=assigned) AND
		ADMIN-DN=N; X 100
		ndc=<npa>; ec=<nxx>; DN=[0-9][0-9]xx; (status=ported-out)
		AND ADMIN-DN=N; X 100
		ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]x; (status=assigned)
		AND ADMIN-DN=N; X 10
		ndc=<npa>; ec=<nxx>; DN=[0-9][0-9][0-9]x;
		(status=ported-out) AND ADMIN-DN=N; X 10
	• PORTED-OUT DNs
Intermediate Telephone	0
Directory Numbers
Reserved DNs	0

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07		3-11