Chapter 6 Using BTS Measurements

Learning the Measurement Types

Audit Measurements

Table 6-32

Audit Measurements

 

 

 

 

 

 

Description

Measurement

 

(* = rapid count could mean a potential problem in the system)

 

 

AUDIT_FS_TOTAL_CA_SWITCHOVER

Audits to check all active CCBs in response to a CA platform switchover

 

 

occurring. This is only applicable when the standby CA becomes active.

 

 

AUDIT_FS_TOTAL_SIP_NOACK_TMO

CCB audits initiated due to a SIP Invite that was not acknowledged that is

 

 

detected by the reporting FS.

 

 

AUDIT_FS_TOTAL_SIP_RESP_TMO

CCB audits initiated due to a SIP Request that has timed out that is detected by

 

 

the reporting FS.

 

 

AUDIT_SS7_LONG_DUR_EXCEEDED

SS7 calls that exceeded the long duration threshold on the reporting trunk

 

 

group.

 

 

AUDIT_SS7_TRUNK_STATE_SYNCED

SS7 trunks that had their local and remote states synchronized on the reporting

 

 

trunk group.

 

 

QOS_GATE_AUDIT_FREED

Dangling Gate IDX memory entries detected and freed by audit by the reporting

 

 

BTS.

 

 

 

SIP Interface Adapter Measurements

Table 6-33

SIP Interface Adapter Measurements

 

 

 

 

 

 

 

 

 

Description

 

Measurement

(* = rapid count could mean a potential problem in the system)

 

 

 

 

SIA_AUDIT_BCM_CALL_RELEASED

Calls released when the SIP side is inactive.

 

 

 

 

SIA_AUDIT_CALL_RELEASED

SIP side calls released due to the SIA memory audit when the BCM side of the

 

 

 

 

call is already released.

 

 

 

 

SIA_AUDIT_CCB_FREED

Call Control Blocks freed due to the SIA audit.

 

 

 

 

SIA_AUDIT_REGCONTACT_FREED

SIP Registration Contacts freed as a result of the SIA Memory Audit.

 

 

 

 

SIA_CALL_FAIL_BY_EXPIRED_REG

Call failures due to a registration expiration.

 

 

 

 

SIA_INCOM_CALL_ABDN

Incoming calls abandoned at the reportingCA.

 

 

 

 

SIA_INCOM_CALL_NOT_ANS

Incoming calls not answered by Called party at reporting CA.

 

 

 

 

SIA_INCOM_END_USR_BUSY

Incoming calls not completed because the end user is busy.

 

 

 

 

SIA_INCOM_FAIL

Failed incoming SIP calls.

 

 

 

 

SIA_INCOM_INIT

Incoming SIP call initializations.

 

 

 

 

SIA_INCOM_SUCC

Successful incoming SIP calls.

 

 

 

 

SIA_INVITE_NO_CALL_TO_REPLACE

“INVITE” SIP messages with “Replaces” header. Calls are rejected because

 

 

 

 

the “replaces” call ID is not found.

 

 

 

 

SIA_KMPL_SUBSCRIBE_RX

KPML SIP SUBSCRIBE messages received.

 

 

 

 

SIA_KPML_NOTIFY_RX

KPML SIP NOTIFY messages received.

 

 

 

 

SIA_KPML_NOTIFY_TX

KPML SIP NOTIFY messages sent to SIP phones.

 

 

 

 

SIA_KPML_SUBSCRIBE_TX

KPML SIP SUBSCRIBE messages sent out by the CA.

 

 

 

 

 

 

 

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

 

 

 

 

 

 

 

 

 

 

6-62

 

 

OL-16000-07

 

 

 

 

 

Page 168
Image 168
Cisco Systems 10200 manual Audit Measurements, SIP Interface Adapter Measurements