Chapter 5 Managing External Resources

Managing Trunk Groups and Trunks

Table 5-2 Managing Trunk Groups (continued)

Task

Sample Command

 

 

Resetting trunks

reset trunk-termination tgn-id=13; cic=1-6;

 

Resetting does the following:

 

Clears all manual and blocked states

 

Clears active/transient calls on a trunk termination, with the

 

exception of SS7 trunk terminations.

 

Brings trunks INS

 

 

Changing trunk states

control trunk-termination tgn-id=17; cic=1-23;

 

target-state=ins; mode=forced;

 

equip trunk-termination tgn-id=13; cic=all;

 

Changes trunks in UEQP to OOS

 

unequip subscriber-termination id=97_8@ipclab.cisco.com;

 

Changes OOS trunks to UEQP

 

 

Forcing MAINT state

SS7 trunks

 

control ss7-trunk-termination tgn-id=103; mode=forced;

 

target-state=maint;

 

Note Set COT on the terminating gateway or switch to perform

 

these tests. Otherwise, the test or tests fail.

 

ISDN trunks

 

control isdn-trunk-termination tgn-id=17; mode=forced;

 

target-state=maint;

 

CAS trunks

 

control cas-trunk-termination tgn-id=64; mode=forced;

 

target-state=maint;

 

Announcement trunks

 

control annc-trunk-termination tgn-id=13; mode=forced;

 

target-state=maint;

 

 

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

5-4

OL-16000-07

 

 

Page 80
Image 80
Cisco Systems 10200 manual Reset trunk-termination tgn-id=13 cic=1-6, Control trunk-termination tgn-id=17 cic=1-23