Cisco Systems 10200 manual Managing Gateways

Chapter 5 Managing External Resources

Managing Gateways

Managing Gateways

Table 5-7 Managing Gateways

Task	Sample Command
Viewing H.323 gateways	status h323-gw id=CHINA-1;
	Possible RAS states:
	• CCH323_RAS_STATE_NONE—operational state is ADMIN
		OOS
	•	CCH323_RAS_STATE_GRQ—Gatekeeper Discovery state
	•	CCH323_RAS_STATE_RRQ—Gateway Registration state
	•	CCH323_RAS_STATE_IDLE—ready for calls
	•	CCH323_RAS_STATE_URQ—Un-registration state.
Setting the state of H.323	control h323-gw id=CHINA_1; target-state=INS;
gateways
Viewing signaling gateway	status sgp id=sgp1;
processes (SGPs)
Viewing media gateways	status mgw id=c5300_197;
status	Possible states:
	•	ADMIN-INS—In-service
	• ADMIN-OOS—Out of service
	•	ADMIN-MAINT—Maintenance Mode
	• ADMIN-OOS-PENDING—Transitioning to out of service
	• ADMIN-MAINT-PENDING—Transitioning to Maintenance
		Mode
Reporting all MTAs that use	report mgw id=%; oper-status=qos-best-effort; aggr-id=aggr1;
“best effort” (non DQoS) calls	start_row=1; limit=5;
in the network having or not	Displays the output as CLI as the output-type has not been mentioned
having a specific aggr id
	or
	report mgw id=%; oper-status=qos-best-effort; aggr-id=%;
	output-type=xml; start_row=1; limit=5; output=report;
	Displays the output in the specific format (CSV/XML) based on the
	output-tpye specified
	Note The output displays only those mgws that use NCS variant.

	Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
5-16	OL-16000-07