JVC HR-J461MS Recording Features, EN17, Select Channel To Watch, Set Counter Display

Recording Features

TV PROG

RECORD

DISPLAY

EN17

Record One Programme

While Watching Another

SELECT CHANNEL TO

WATCH

1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV's channel controls appears on the TV screen while the one selected with the TV PROG buttons is recorded on the tape.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

1	SET COUNTER DISPLAY
	Press DISPLAY until a counter reading appears on the
	dispay panel.
	● By pressing the DISPLAY button, you can change the
	display to show the counter reading, channel
	position*, clock time.
	*Channel position is not displayed during playback.

1 2 3

4 5 6

7 8 9

C.RESET0

2

4

TV PROG

2	RESET COUNTER
	Press C. RESET before starting recording or playback.
	● The counter is reset to "0:00:00" and shows the exact
	elapsed time as the tape runs.

Instant Timer Recording (ITR)

1

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "" blinks and 0:30 appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.