IP Proprietary Telephone

Quick Reference Guide

Model No. KX-NT136

Important Information

When using the KX-NT136, keep the following conditions in mind.
If the unit does not operate properly, disconnect the unit from the Ethernet® cable and
then connect again.
If you are having problems making calls, unplug the Ethernet cable and connect a known
working IP Proprietary Telephone (IP-PT). If the known working IP-PT operates properly,
have the defective IP-PT repaired by an authorised Panasonic Factory Service Centre.
If the known working IP-PT does not operate properly, check the Hybrid IP-PBX and the
Ethernet cable.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with
chemical agents such as benzene or thinner.
Use only the correct Panasonic handset.
Do not disassemble this unit. Dangerous electrical shock could result. The unit must
only be disassembled and repaired by qualified service technicians.
If damage to the unit exposes any internal parts, immediately disconnect the cable or cord.
If the power is supplied from the network to the IP-PT [Power-over-Ethernet], disconnect
the Ethernet cable. Otherwise, disconnect the AC adaptor cord. Then return this unit to a
service centre.
Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
This unit is designed to aid the visually handicapped to locate dial keys and buttons.
This unit is designed to be installed under controlled conditions of ambient temperature
and a relative humidity.
Avoid installing the unit in damp or humid environments, such as bathrooms or swimming
pools.
999 and 112 can be dialled on the product after accessing the CO line for the purpose of making
outgoing calls to the BT emergency (999) and (112) services (United Kingdom only).
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.
IMPORTANT NOTICE:
Under power failure conditions, the IP-PT may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for use in an emergency.
For information regarding network setup of the IP-PT such as IP address, please
refer to the Installation Manual for the Panasonic Hybrid IP-PBX.
If an error message is shown on your display consult the network administrator.
The firmware of the KX-NT136 is protected by copyright laws and international treaty
provisions, and all other applicable laws. It can not be reverse engineered, decompiled
or disassembled.