9
Location of Controls
Headset Jack
* Headset (not included)
Recommended: KX-TCA89
LCD (Liquid Crystal Display)
HOLD
FLASH/RECALL
SP-PHONE
Navigator Key
ENTER
Flexible CO Buttons
CANCEL
Soft Buttons
Message/Ringer
Lamp
MESSAGE
REDIAL
TRANSFER
AUTO DIAL/
STORE
AUTO ANS/
MUTE
INTERCOM
CONFERENCE
FWD/DND
(Call Forwarding/
Do Not Disturb)
PAUSE
Microphone
PAUSE:
Used to insert a pause when
storing a telephone number. Also used to
enter and exit the personal programming
mode.
AUTO ANS (Auto Answer)/MUTE:
Used to
receive an incoming call in hands-free mode
or mute the microphone/handset during a
conversation.
AUTO DIAL/STORE:
Used for System/
Personal Speed Dialling or storing
programme changes.
FLASH/RECALL:
Used to disconnect the
current call and make another call without
hanging up.
Flexible CO Buttons:
U
sed to make or receive an outside call.
Pressing one of these buttons seizes an idle
outside line automatically. (Button assignment
is required.) Also used as feature buttons.
(Button assignment is required.)
Message/Ringer Lamp:
When you receive an
intercom call, the lamp flashes green, and on
an outside call, the lamp flashes red.
When someone has left you a message, the
lamp stays on red.
MESSAGE:
Used to leave a message
waiting indication or call back the party
who left the message waiting indication.
INTERCOM AUTO ANS
MUTE STORE
AUTO DIAL
PAUSEFWD/DNDCONF
FLASH/
RECALL HOLD SP-PHONE
TRANSFERREDIALMESSAGE
KX-NT136
• For further information, refer to the User Manual of the Hybrid IP-PBX.