Intel® Server System SR1520ML User’s Guide 29

Installing the Processor Air Duct

1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover” on page 14.
4. Lower the air duct into place. Use caution so you do not pinch or disengage cables
that may be near or under the air duct.
Figure 21. Installing the Processor Air Duct
5. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
Installing and Removing Memory
Caution: The memory is NOT hot swappable. Before removing or replacing any memory DIMM,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
AF002503