5.Gradually and equally tighten each captive screw in the same order until each is firmly tightened.
A | 3 |
|
| B | |
2 |
| |
| 1 | |
|
| |
| 4 |
|
AF002517
Figure 28. Installing the Heat Sink
6.Install the processor air duct. For instructions, see “Installing the Processor Air Duct” on page 29.
7.Install the server system cover. For instructions, see “Installing the Server System Cover”.
Replacing the Power Supply
Caution: The power supply is NOT hot swappable. Before removing or replacing the power supply, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet.
The power supply can be replaced if it fails or if one of the fans that is integrated into it fails. To replace the power supply, use the following instructions.
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information” on page iii.
2.Power down the server and unplug all peripheral devices and the AC power cable.
Intel® Server System SR1520ML User’s Guide | 37 |
